FixVault
Home › Isuzu › 1997 › Trooper Limited › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul › Fuel System › Accelerator Cable › Adjusting Cable At Throttle Body

Adjusting Cable At Throttle Body

  1. Loosen adjusting and jam nuts. Pull on cable while fully closing throttle valve. Tighten adjusting and jam nuts.
  2. Loosen adjusting nut by 3 turns and tighten jam nut again. Valve lever must return up to stopper screw. If valve lever does not reach stopper screw, repeat adjustment procedure.
About FixVault