Cruise Control Systems: Operation

The cruise control system will set and automatically maintain any set speed greater than 25 MPH. To set, ensure main switch is on and cruise control indicator is illuminated, press SET switch, after reaching desired speed. Pressing SET switch sends a "set" signal to cruise control unit, which engages the cruise control actuator to maintain vehicle set speed. Pushing main switch to off will cancel cruise control operation and erase vehicle speed setting from memory.

If system is temporarily disengaged by brakelight switch, clutch switch or gear position switch, pressing RESUME switch will automatically return vehicle to previously set speed. Holding RESUME switch will gradually increase vehicle speed, without having to depress accelerator pedal. This sends an acceleration signal to cruise control unit. When RESUME switch is released, system is reprogrammed for newly set vehicle speed.

For gradual deceleration without pressing brake pedal, push SET switch and hold switch until desired speed is reached. This sends a deceleration signal to cruise control unit. When desired speed is reached, release SET switch, and a new vehicle speed setting should be maintained.