FixVault
Home › Isuzu › 1999 › Oasis › Repair and Diagnosis › External Pages › Different car › Section 24 (Generators & Regulators) › Bench Testing › Stator

Bench Testing: Stator

WARNING: This page is about a different car, the 2002 Honda Accord, 2001 Honda Accord, 2000 Honda Accord, 1999 Honda Accord, and 1998 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that there is continuity between each pair of leads. If there is continuity, go to next step. If there is no continuity, replace the alternator.
  2. Check for no continuity between each lead and the coil core. If there is no continuity, go to next step. If there is continuity, replace the alternator.
  3. Be careful not to get any grease or oil on the slip rings during reassembly.
  4. If you remove the pulley, tighten locknut to specification. See TORQUE SPECIFICATIONS 
Fig 1: Testing Stator Assembly
G90A04036Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault