FixVault

Driver Or Passenger Rear Window Inoperative: Rodeo

  1. Ensure driver's power window operates normally. If driver's power window is okay, go to next step. If driver's power window does not function properly, go to DRIVER-SIDE WINDOW INOPERATIVE .
  2. Disconnect suspect rear power window and lock switch. Momentarily connect fused jumper between suspect rear power window and lock switch connector terminal No. 5 (Brown/Red wire). Connect a jumper wire between rear power window and lock switch connector terminal No. 6 (Brown/White wire). If power window motor does not move to up position, check for open wires or poor connections at switch. If circuits are okay, replace suspect rear power window motor. See POWER WINDOW MOTOR  under REMOVAL & INSTALLATION. If power window motor moves to up position, go to next step.
  3. Momentarily connect a fused jumper between suspect rear power window and lock switch connector terminal No. 6 (Brown/White wire). Connect another jumper wire between rear power window and lock switch connector terminal No. 5 (Brown/Red wire). See WIRING DIAGRAMS . If power window motor does not move to down position, check for open wires or poor connections at switch. If circuits are okay, replace suspect rear power window motor. See POWER WINDOW MOTOR  under REMOVAL & INSTALLATION. If power window motor moves to down position, replace suspect power window and lock switch. See POWER WINDOW SWITCH  under REMOVAL & INSTALLATION.