Alignment Specification Change (IB00-06-S001)
WARNING: This page is about the Rodeo LS, 2.2 D, which is a different variant/trim than selected.
Publication date: 1970-01-01Reference number: IB00-06-S001
1998-2000 RODEO (UE) ALIGNMENT SPECIFICATION CHANGE
TECHNICAL SERVICE BULLETIN
Reference Number(s): IB00-06-S001, Date of Issue:
MARCH, 2000
| ISUZU: | All 1998-2000 Rodeo |
| AFFECTED VEHICLES: | All 1998-2000 Rodeo (UE) models. |
Affected Vehicles
All 1998-2000 Rodeo (UE) models.
Service Information
The Toe-In specification has been changed. Please update your Workshop Manuals to read the following:
TOE-IN SPECIFICATION
| CURRENT (OLD) | 0 mm to +/- 2 mm (0 in. to +/- 0.08 in.) |
| CORRECTION (NEW) | 0 mm to + 2 mm (0 in. to + 0.08 in.) |
IMPORTANT:
The new specification allows the variation of the toe settings to be on the toe-in and not on the toe-out.