Switch Assembly

WARNING: This page is about a different car, the 2004 Subaru Forester, 2003 Subaru Forester, and 2002 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Be sure there is continuity between the terminals S and M, and between terminal S and ground. See Fig 1 . Use circuit tester (set in "ohm"). Also check to be sure there is no continuity between terminal M and B.

Fig 1: Checking Continuity Between Terminals "S" & "M"

Courtesy of SUBARU OF AMERICA, INC.