FixVault
Home › Isuzu › 2003 › Axiom Base, RWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Valve Body Assembly (Adapter Case) › Installation

Valve Body Assembly (Adapter Case): Installation

  1. Inspect electrical 4 way connector and seal of adapter case. Replace if necessary.
  2. Install gasket, transfer plate, and gasket.
  3. Install adapter case valve body and seven 13 mm screws. Tighten the screws to the specified torque.

    Torque:  20 N.m (15 lb ft)

  4. Connect wiring harness assembly to converter clutch solenoid and force motor.
  5. Install oil pan gasket, oil pan, and twelve 10 mm screws. Tighten the screws to the specified torque.

    Torque:  11 N.m (96 lb in)

  6. Fill transmission through the overfill screw hole of oil pan, using ATF DEXRON®-III. Refer to CHANGING TRANSMISSION FLUID .
  7. Connect battery ground cable.
About FixVault