FixVault
Home › Isuzu › 2003 › Rodeo LS, 2.2 D › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Immobilizer System › Tech 2 Scan Tool › Transponder Program

Transponder Program

  1. Select "Body" and "Immobilizer".
  2. Select "Programming" and "Program Transponder-Keys".
  3. See immobilizer status on Tech-2 screen, and enter security code. If the status does not allow the programming, only immobilizer status is displayed.
  4. Insert Non-programmed Transponder-key and press soft key of "Confirm".
    Fig 1: Identifying Insert Non-Programmed Transponder-Key Screen
    G02791120Courtesy of ISUZU MOTOR CO.
  5. "Turn On ignition key", is displayed if the ignition is off.
  6. The transponder status is displayed if the status does not allow the programming.
  7. When programming starts "Programming Transponder - key!" is displayed.
  8. Turn off Ignition key.
  9. Turn On Ignition key.
  10. If the programming was not successful, the transponder status is only displayed.
  11. To program more illustration press soft key.
    Fig 2: Identifying Program More Transponder-Key Screen
    G02791121Courtesy of ISUZU MOTOR CO.
  12. See programming result.
About FixVault