Shift Lock Cable: Removal

Set ignition key in "LOCK" position and selector lever in "P" position.
Remove transfer control lever knob (4X4), lower cluster assembly, rear console, center console, selector lever knob and cover.
- Refer to SELECTOR LEVER .
Disconnect inner cable from selector lever assembly then push claw and disconnect cable assembly.

Fig 1: Disconnecting Cable Assembly
Courtesy of ISUZU MOTOR CO.
Disconnect lock adjust.

Fig 2: Disconnecting Lock Adjust
Courtesy of ISUZU MOTOR CO.
Remove instrument panel lower cover and steering column cover.
Remove spring pin and disconnect inner cable.
- Disconnect outer cable from bracket.
  
  Fig 3: Disconnecting Outer Cable From Bracket
  Courtesy of ISUZU MOTOR CO.