FixVault
Home › Isuzu › 2003 › Rodeo LSE, 2.2 D › Repair and Diagnosis › Steering › Power Steering › Power-Assisted Steering System › Front End Alignment Inspection and Adjustment › Toe-in Adjustment

Toe-in Adjustment

  1. To adjust the toe-in angle, loosen the lock nuts (2) on the tie rod (1) and turn the tie rod.

    Turn both rods the same amount, to keep the steering wheel centered.

    Toe-in:  0 to +2 mm (0 to +0.08 in)

    Fig 1: Adjusting Toe-In
    G02788393Courtesy of ISUZU MOTOR CO.
  2. Tighten the lock nut to the specified torque.
    1. Torque:  98 N.m (72 lb ft)
About FixVault