FixVault
Home › Isuzu › 2004 › Ascender LS, 5.3 P, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) - 5.3L › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Top Of Engine Wiring Harness View
    GM898326Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the manifold absolute pressure (MAP) sensor electrical connector (3).
    2. Fig 2: View Of MAP Sensor
    GM825838Courtesy of GENERAL MOTORS CORP.
  2. Remove the MAP sensor (1) from the intake manifold.
About FixVault