FixVault
Home › Isuzu › 2004 › Ascender Limited, 5.3 P, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) - 5.3L › Repair Instructions › Accelerator Pedal Position (APP) Sensor Replacement › Removal Procedure

Removal Procedure

NOTE: Refer to Handling Electronic Throttle Control Notice in Cautions and Notices.
    Fig 1: View Of APP Sensor Electrical Connector
    GM899725Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
    2. Fig 2: View Of APP Sensor
    GM742494Courtesy of GENERAL MOTORS CORP.
  2. Remove the 3 APP sensor bolts (1).
  3. Remove the APP sensor (2).
About FixVault