FixVault
Home › Isuzu › 2004 › Ascender S, 4WD › Repair and Diagnosis › Body & Frame › Windows › Stationary Windows › Repair Instructions › Rearview Mirror Replacement › Installation Procedure

Installation Procedure

    Fig 1: Mirror Removed From Support
    GM171538Courtesy of GENERAL MOTORS CORP.
  1. Slide the mirror onto the support.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the set screw.

    Tighten:  Tighten the set screw to 2 N.m (18 lb in).

    3. Fig 2: Wire Connector And Mirror
    GM375840Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector (1), if equipped.
About FixVault