FixVault
Home › Isuzu › 2004 › Ascender S, 4WD › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) - 4.2L › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating Intake Air Temperature Sensor
    GM732048Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the intake air temperature (IAT) sensor electrical connector.
  2. Remove the IAT sensor (1) from the air duct with a twisting and pulling motion.
About FixVault