FixVault
Home › Isuzu › 2004 › Ascender S, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) - 4.2L › Repair Instructions › Camshaft Position (CMP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating Camshaft Position Sensor Electrical Connector
    GM487648Courtesy of GENERAL MOTORS CORP.
  1. Remove the camshaft position (CMP) sensor electrical connector (1).
  2. Remove the CMP sensor retaining bolt.
About FixVault