FixVault
Home › Isuzu › 2004 › Axiom Base, 4WD › Repair and Diagnosis › Engine Performance › System › Engine Control System - Diagnostic Information & Procedures › On Vehicle Service › Engine Control Module (ECM) › Installation Procedure

Installation Procedure

  1. Install the ECM to bracket and fix with the clip.
    Fig 1: Installing ECM To Bracket
    G02788888Courtesy of ISUZU MOTOR CO.
  2. Connect the ECM electrical connectors.
  3. Pull The "A" slider and lift the "B" lever.
Fig 2: Connecting ECM Electrical Connectors
G02788889Courtesy of ISUZU MOTOR CO.
About FixVault