FixVault
Home › Isuzu › 2004 › Axiom Base, 4WD › Repair and Diagnosis › Engine Performance › System › Engine Control System - Diagnostic Information & Procedures › On Vehicle Service › Engine Control Module (ECM) › Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable.
  2. Block The wheels.
  3. Pull The "A" slider and lift the "B" lever.
  4. Disconnect the ECM electrical connectors.
    Fig 1: Disconnecting ECM Electrical Connectors
    G02788886Courtesy of ISUZU MOTOR CO.
  5. After removing the clip which fixes the ECM to the bracket, remove ECM.
Fig 2: Removing ECM
G02788887Courtesy of ISUZU MOTOR CO.
About FixVault