FixVault
Home › Isuzu › 2005 › Ascender Limited, RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 5.3L - Introduction › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating Fuel Tank Pressure Sensor
    GM1480291Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank pressure sensor.
  2. Connect the fuel tank pressure sensor electrical connector.
  3. Install the fuel tank. Refer to Fuel Tank Replacement (TrailBlazer EXT, Envoy XL, Envoy XUV) or Fuel Tank Replacement (TrailBlazer, Envoy, Rainier) .
About FixVault