FixVault
Home › Isuzu › 2005 › Ascender Limited, RWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Engine Control System - 4.2L - Introduction) › Repair Instructions › Fuel Rail Assembly Replacement › Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Fuel Injector Wire Harness (2) & Fuel Rail (1)
    GM1482972Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector wire harness (2) from the fuel rail (1).
  2. Remove the fuel injectors (4) from the fuel rail (4). Refer to Fuel Injector Replacement .
About FixVault