FixVault
Home › Isuzu › 2005 › Ascender Limited, RWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Engine Control System - 4.2L - Introduction) › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Locating Intake Air Temperature Sensor
    GM732048Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor (1) to the air duct with a pushing and twisting motion.
  2. Reconnect the IAT sensor electrical connector.
About FixVault