FixVault
Home › Isuzu › 2005 › Ascender S, 5.3 M, RWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 5.3L - Introduction › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement (TrailBlazer EXT, Envoy XL, Envoy XUV) or Fuel Tank Replacement (TrailBlazer, Envoy, Rainier) .
    2. Fig 1: Locating Fuel Tank Pressure Sensor
    GM1480291Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the fuel tank pressure sensor electrical connector.
  3. Remove the fuel tank pressure sensor.
About FixVault