Removal Procedure

Fig 1: View Of Ambient Air Temperature Sensor Electrical Connector

GM1276971

Courtesy of GENERAL MOTORS CORP.

Remove the air inlet grille. Refer to Grille Replacement in Exterior Trim.
Disconnect the electrical connector to the ambient air temperature sensor.

Fig 2: View Of Sensor Retaining Tabs

GM1276973

Courtesy of GENERAL MOTORS CORP.

Release the tabs (1) retaining the sensor to the radiator support bracket.

Fig 3: View Of Ambient Air Temperature Sensor

GM1276969

Courtesy of GENERAL MOTORS CORP.

Remove the sensor (1) from the radiator support bracket.