FixVault
Home › Isuzu › 2006 › i-350 › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.5L (L52) - Introduction (2 Of 2) › Repair Instructions › Fuel Level Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel tank module. Refer to Fuel Tank Module Replacement .
    2. Fig 1: View Of Fuel Level Sensor Electrical Connector
    GM1361719Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the fuel level sensor electrical connector from the module.
    3. Fig 2: View Of Fuel Level Sensor
    GM1361720Courtesy of GENERAL MOTORS CORP.
  3. Complete the following in order to remove the fuel level sensor from the module assembly:
    1. Disengage the locking tab from the sensor.
    2. Slide the sensor downward from the module.
About FixVault