FixVault
Home › Isuzu › 2007 › Ascender 4WD › Repair and Diagnosis › Body & Frame › Windows › Fixed & MOVEABLE Window Systems › Repair Instructions › Quarter Window Replacement › Installation Procedure

Installation Procedure

    Fig 1: vQuarter Window
    GM1231053Courtesy of GENERAL MOTORS CORP.
  1. Install the body side stationary window (3) into the opening. Refer to Urethane Adhesive Installation of Bodyside Stationary Windows (w/Frame)  or Urethane Adhesive Installation of Bodyside Stationary Windows (w/o Frame) .
  2. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
    3. Fig 2: View Of Roof Applique - Rear
    GM1347082Courtesy of GENERAL MOTORS CORP.
  3. Install the upper rear roof applique. Refer to Roof Rear Applique Replacement .
  4. Inspect the radio or the OnStar® system, if equipped, to verify reception.
  5. Close the endgate window.
About FixVault