FixVault
Home › Isuzu › 2007 › Ascender RWD › Repair and Diagnosis › Engine Mechanical › Engine Exhaust System › Repair Instructions › Catalytic Converter Heat Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Catalytic Converter Heat Shield
    GM753689Courtesy of GENERAL MOTORS CORP.
  1. Place the catalytic converter heat shield onto the floor panel studs.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Secure the heat shield with the 5 bolts.

    Tighten:  Tighten the catalytic converter heat shield bolts to 7 N.m (62 lb in).

  3. Lower the vehicle.
About FixVault