Removal Procedure
WARNING: This page is about a different car, the 2008 Saab 9-7X. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the negative battery cable. Refer to Battery Negative Cable Replacement (4.2L Engine) or Battery Negative Cable Replacement (5.3L Engine) .
- Mark the location of the negative battery cable clips and remove the clips from the cable.
- Remove the tape securing the generator battery current sensor to the negative battery cable.
- Squeeze the negative battery cable branches together.
- Slide the generator battery current sensor (1) off of the negative battery cable.
IMPORTANT:
Note the orientation of the generator battery current sensor prior to removal.