FixVault
Home › Isuzu › 2007 › i-290 LS, Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 2.9L - Introduction (2 Of 2) › Repair Instructions › Powertrain Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of PCM
    GM1352004Courtesy of GENERAL MOTORS CORP.
  1. Install the PCM into the PCM mounting bracket, allowing the tabs to fully engage.
    2. Fig 2: View Of Engine Wiring Harness & Retainers
    GM1350711Courtesy of GENERAL MOTORS CORP.
  2. Connect the PCM harness connectors (2) to the PCM body (3).
  3. If a new PCM is being installed, the PCM must be programmed. Refer to Control Module References .
About FixVault