FixVault
Home › Isuzu › 2007 › i-290 S, Standard › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Shoulder Belt Guide Adjuster Replacement - Front (Extended Cab) › Installation Procedure

Installation Procedure

    Fig 1: View Of Front Seat Belt Shoulder Adjuster - Extended Cab
    GM1339857Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the 2 bolts securing the front seat belt shoulder adjuster (1) to the vehicle.

    Tighten:  Tighten the front seat belt shoulder adjuster bolts to 52.5 N.m (39 lb ft).

  2. Install the rear side access door upper trim panel (3).
  3. Install the front seat belt upper guide with the bolt. Ensure that the seat belt webbing is not twisted.

    Tighten:  Tighten the front seat belt upper guide bolt to 52.5 N.m (39 lb ft).

  4. Install the front seat belt upper guide shoulder bolt trim cover.
  5. Install the knob (2) on the front seat belt shoulder adjuster (1).
About FixVault