FixVault
Home › Isuzu › 2008 › i-290 Automatic › Repair and Diagnosis › Brakes › Anti-Lock Brake System, Traction Control System & Stability Control System › Repair Instructions › Brake Pressure Modulator Valve Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of BPMV & Mounting Bracket
    GM1384684Courtesy of GENERAL MOTORS CORP.
  1. Install the BPMV to the mounting bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Tighten the mounting nuts.

    Tighten:  Tighten the mounting nuts to 9 N.m (80 lb in).

  3. Install the EBCM assembly. Refer to Electronic Brake Control Module Replacement .
  4. Bleed the system. Refer to Hydraulic Brake System Bleeding (Manual) or Hydraulic Brake System Bleeding (Pressure) .
About FixVault