FixVault
Home › Isuzu › 2008 › i-290 Automatic › Repair and Diagnosis › Brakes › Anti-Lock Brake System, Traction Control System & Stability Control System › Repair Instructions › Longitudinal Accelerometer Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Longitudinal Accelerometer
    GM1277052Courtesy of GENERAL MOTORS CORP.
  1. Install the sensor to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the 2 retaining nuts.

    Tighten:  Tighten the screws to 9 N.m (80 lb in).

    3. Fig 2: View Of Longitudinal Accelerometer Electrical Connector
    GM1277053Courtesy of GENERAL MOTORS CORP.
  3. Install the electrical connector to the sensor.
  4. Install the left split bench or bucket seat. Refer to Front Seat Replacement - Bucket or Split Bench Seat Replacement .
About FixVault