FixVault
Home › Isuzu › 2008 › i-290 Automatic › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
    2. Fig 1: View Of Battery Cables
    GM1313634Courtesy of GENERAL MOTORS CORP.
  2. Open the protective cover (3) to access the battery positive cable terminal.
  3. Loosen the battery positive cable nut (4).
  4. Disconnect the battery positive cable from the battery.
    5. Fig 2: View Of Battery Box
    GM1313644Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the battery vent duct from the upper battery box (2).
  6. Press the locking tabs (1) inward in order to remove the upper battery box (2) from the lower battery box (3).
    7. Fig 3: View Of Battery & Battery Retainer
    GM1313643Courtesy of GENERAL MOTORS CORP.
  7. Remove the battery retainer nut (3).
  8. Remove the battery retainer (1) and washer (2).
  9. Remove the battery (4) from the lower battery box (5).
About FixVault