FixVault
Home › Isuzu › 2008 › i-290 Standard › Repair and Diagnosis › Brakes › Anti-Lock Brake System, Traction Control System & Stability Control System › Repair Instructions › Longitudinal Accelerometer Replacement › Removal Procedure

Removal Procedure

  1. Remove the left split bench or bucket seat. Refer to Front Seat Replacement - Bucket or Split Bench Seat Replacement .
  2. Access the sensor through service slit provided in the carpet.
    3. Fig 1: View Of Longitudinal Accelerometer Electrical Connector
    GM1277053Courtesy of GENERAL MOTORS CORP.
  3. Remove the electrical connector from the sensor.
    4. Fig 2: View Of Longitudinal Accelerometer
    GM1277052Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 nuts retaining the sensor to the floor panel.
  5. Remove the sensor from the vehicle.
About FixVault