All Models
Place wheels in straight-ahead position and measure toe-in. If not to specifications, adjust by loosening steering link lock nuts and rotating adjuster sleeves to obtain correct toe-in. Tighten lock nuts and recheck toe-in.
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Caster (Degrees) | Camber (Degrees) | Toe-In (Inches) | Toe-Out On Turns (Degrees) | ||
|---|---|---|---|---|---|---|
| Inner | Outer | |||||
| XJ6 & XJ12 | ||||||
| Front | 2 1/4±1/4 | 1/2±1/4 | 1/16 to 1/8 | ... | ... | |
| Rear | ...... | 3/4±1/4 | ...... | ... | ... | |
| XKEV-12 | ||||||
| Front | 2 1/2±1/2 | 0±1/4 | 1/16 to 1/8 | ... | ... | |
| Rear | ...... | -3/4±1/4 | ...... | ... | ... | |