Ignition Module: Removal

WARNING: This page is about a different car, the 1998 Jaguar XK8 and 1997 Jaguar XK8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery ground cable.
- Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been disconnected.
- Remove the luggage compartment floor panel (when standard size spare wheel is supplied) and the battery cover.
- Remove the nut from the ground stud.
Disconnect connector from ignition control module.

Fig 1: Disconnecting Ignition Control Module Harness Connector
Courtesy of JAGUAR CARS, INC.
Remove fixings securing module.
- Remove module
  
  Fig 2: Removing Ignition Module
  Courtesy of JAGUAR CARS, INC.