Section 31 (Anti-Lock Control): Specifications
WARNING: This page is about a different car, the 2001 Jaguar XK8. However, it is still accessible from the selected car via links, so may be relevant.
LUBRICANTS, FLUIDS, SEALANTS AND ADHESIVES SPECIFICATION
| Unit | Specification |
|---|---|
| Brake fluid | ITT Super Dot 4 |
CAUTION:
Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict the number of times a nut or bolt can be used. See THREAD LOCKING DEVICES
for additional information.
TORQUE SPECIFICATION
| Component | Nm |
|---|---|
| Bolt - front wheel speed sensor | 8-10 |
| Bolt - rear wheel speed sensor | 8-10 |
| Bolt - hydraulic control unit to bracket | 8-10 |
| Hub rotor nut | 270-330 |
CAUTION:
Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict the number of times a nut or bolt can be used. See THREAD LOCKING DEVICES
for additional information.
BRAKE TUBE, HOSES AND BRACKET TORQUE SPECIFICATIONS
| Component | Nm |
|---|---|
| Bleed nipple - front | 4-6 |
| Bleed nipple - rear | 8-11 |
| Hose to front caliper | 10-14 |
| Hose banjo to rear caliper - bolt | 30-40 |
| M10 hose locknut | 15-20 |
| M10 brake tube female-nut | 13-17 |
| M10 brake tube male-nut | 13-17 |
| M12 brake tube male-nut | 15-20 |
| Bolt - 3-way tube connector to body | 9-12 |