FixVault
Home › Jaguar › 2002 › S-Type Base, 4.0 P › Repair and Diagnosis › External Pages › Different car › Section 17 (Specifications & Procedures) › Wheel Alignment Specifications

Wheel Alignment Specifications

WARNING: This page is about a different car, the 2004 Jaguar S-Type and 2003 Jaguar S-Type. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS(1)

Application (2) Minimum (2) Maximum
Camber (Front)
Left -.60 .40
Right -1.10 -.10
Balance (3) -1.20 .20
Camber (Rear)
Left -1.50 0
Right -1.50 0
Balance (3) -.75 .75
Caster (Front)
Left 6.92 8.32
Right 6.92 8.32
Balance (4) -.70 .70
Toe-In (Front)
Left -.18 -.02
Right -.18 -.02
Total -.37 -.03
Toe-Out On Turns (5) (5)
Toe-In (Rear)
Left .02 .22
Right .02 .22
Total .08 .42
Thrust Angle (6) -.10 .10
(1) All specification are with tires at normal inflation pressure and are showroom ride height specifications. For additional information, see RIDE HEIGHT SPECIFICATIONS  .
(2) Measurement in degrees.
(3) Camber balance equals right camber reading minus left camber reading.
(4) Caster balance equals right caster reading minus left caster reading.
(5) Information is not available from manufacturer.
(6) Thrust angle equals right rear toe reading minus left rear toe reading.
About FixVault