Engine Specifications
WARNING: This page is about a different variant/trim than selected.
NOTE:
Limited information is available from manufacturer.
GENERAL SPECIFICATIONS
| Application | Specification |
|---|---|
| Displacement | 181 Cu. In. (3.0L) |
| Bore | 3.50" (89.0 mm) |
| Stroke | 3.13" (79.5 mm) |
| Compression Ratio | 10.5:1 |
| Firing Order | 1, 4, 2, 5, 3, 6 |
VALVES & VALVE SPRINGS
| Application | In. (mm) | |
|---|---|---|
| Valve Guide Inner Diameter | 0.2171-0.2182 (5.514-5.544) | |
| Intake | ||
| Valve Head Diameter | 1.372-1.384 (34.85-35.15) | |
| Valve Effective Length | 3.548-3.580 (90.13-90.93) | |
| Valve Stem Diameter | 0.2154-0.2162 (5.471-5.492) | |
| Valve Stem-To-Guide Clearance | 0.0009-0.0026 (0.022-0.067) | |
| Valve Face Angle | 45.75° | |
| Exhaust | ||
| Valve Head Diameter | 1.175-1.187 (29.85-30.15) | |
| Valve Effective Length | 3.531-3.539 (89.68-89.88) | |
| Valve Stem-To-Guide Clearance | 0.0014-0.0031 (0.035-0.080) | |
| Valve Stem Diameter | 0.2151-0.2157 (5.464-5.479) | |
| Valve Face Angle | 45.25° | |
| Valve Spring Free Length | 1.74 (44.2) | |
| Valve Spring Installed Height | 1.32 (33.4) | |
CAMSHAFT
| Application | In. (mm) |
|---|---|
| Camshaft Lobe Lift - Intake | 0.3688 (9.367) |
| Camshaft Lobe Lift - Exhaust | 0.3725 (9.461) |
| Camshaft End Play | 0.0028-0.0059 (0.070-0.150) |
| Camshaft Journal-To-Cylinder Head Bearing Surface Clearance | 0.0010-0.0030 (0.025-0.076) |
| Camshaft Journal Diameter Runout Limit | 0.0016 (0.040) |
| Camshaft Journal Diameter Out Of Round | 0.0005 (0.013) |