Output Shaft Speed (OSS) Sensor: Installation
WARNING: This page is about a different car, the 2003 Jaguar XJ8, 2003 Jaguar XJ, 2002 Jaguar XJ8, 2002 Jaguar XJ, and 2001 Jaguar XJ8. However, it is still accessible from the selected car via links, so may be relevant.
- Fit the output speed sensor and tighten the retaining screw to the specified torque figure. See Figure.
- Using a new gasket, install the fluid pan and tighten the twenty-two fixings to the specified. See Figure.
- Connect the battery and fit the battery cover.
- Reset the radio and the clock.
- Check the transmission fluid level. Refer to TRANSMISSION FLUID FILLING .
NOTE:
M6 fixing.
NOTE:
Ensure extreme cleanliness and never reuse transmission fluid.