FixVault
Home › Jaguar › 2002 › XJR Base › Repair and Diagnosis › External Pages › Different car › Section 32 (External Controls) › Removal & Installation › Selector Lever Indicator Assembly › Removal

Selector Lever Indicator Assembly: Removal

WARNING: This page is about a different car, the 2003 Jaguar XJ8, 2003 Jaguar XJ, 2002 Jaguar XJ8, 2002 Jaguar XJ, and 2001 Jaguar XJ8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cover and disconnect battery ground cable.
  2. Remove the selector lever knob. See TRANSMISSION SELECTOR LEVER KNOB .
  3. Remove the J-gate surround. See SELECTOR LEVER GATE FINISH PANEL .
  4. Remove the console finisher veneer panel. See FLOOR CONSOLE FINISH PANEL for 2001 or FLOOR CONSOLE FINISH PANEL for 2002-03.
  5. Remove the selector indicator module screws.
    Fig 1: Removing Selector Indicator Module Screws
    G00378928Courtesy of JAGUAR CARS, INC.
  6. Remove the selector indicator module.
    1. Free the D to 4 switch harness multiplug from the mounting bracket and disconnect the multiplug.
    2. Displace the P switch multiplug from the mounting bracket.
    3. Route the D to 4 harness from under the P switch harness.
    Fig 2: Disconnecting & Connecting Selector Module Electrical Connectors
    G00378929Courtesy of JAGUAR CARS, INC.
About FixVault