Section 67 (Safety Belt System): Specifications: Torques
WARNING: This page is about a different car, the 2001 Jaguar XJR and 2001 Jaguar XJ8. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Component | Nm |
|---|---|
| Screws, front seat belt height adjuster to B/C post LH and RH | 24 - 26 |
| Nut, seat belt upper anchor to height adjuster LH and RH | 30 - 40 |
| Bolt, LH and RH rear seat belt lower anchor to body | 30 - 40 |
| Bolt, center rear seat belt lower anchor to body | 30 - 40 |
| Bolts, rear seat belt automatic locking retractor LH, RH and center to squab panel | 30 - 40 |
| Bolt, rear seat belt buckle LH, RH and center to body | 30 - 40 |
| Bolt, front seat belt buckle LH and RH to seat rail | 30 - 40 |
| Bolt, front seat belt lower anchor LH and RH to seat rail | 30 - 40 |
| Bolts, front seat belt automatic locking retractor/pretensioner to B post | 30 - 40 |
| Bolts, side airbag to seat frame | 9 - 11 |
| Screws, front seat belt guide to B/C post | 8 - 10 |
| Screws, single point sensor to tunnel | 5 - 7 |
| Screws, side impact sensing module to 'B' post | 5 - 7 |