FixVault
Home › Jaguar › 2002 › XJR Base › Repair and Diagnosis › External Pages › Different car › Section 80 (Seating) › Removal and Installation › Seat Control Switch › Installation

Seat Control Switch: Installation

WARNING: This page is about a different car, the 2001 Jaguar XJR and 2001 Jaguar XJ8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install and fully seat switch pack in seat mounting.
  2. Raise cushion pad for access to rear of switch pack and connect harness multiplug.
  3. Release cushion pad and secure cushion cover front elastic retaining straps to seat frame.
  4. Pull cushion cover over cushion pad and fully seat edge retaining strip on seat frame.
  5. Install seat in vehicle. Refer to FRONT SEAT  .
  6. Connect ground cable to battery terminal and fit battery cover. Refer to BATTERY CONNECT .
About FixVault