FixVault
Home › Jaguar › 2003 › XJR › Repair and Diagnosis › External Pages › Different car › Section 121 (Engine) › Engine › Engine Mount LH - In-Vehicle Procedures › Installation

Engine Mount LH - In-Vehicle Procedures: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Jaguar XKR, 2006 Jaguar XK8, 2005 Jaguar XKR, 2005 Jaguar XK8, and 2004 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. Install the engine mount.
    • Tighten to 40 (+/- 15%) Nm.
      GJ0002382Courtesy of JAGUAR CARS, INC.
  2. Lower the vehicle.
  3. Remove the special tool.
    1. Loosen the hook adjustment nuts.
    2. Detach the hooks from the engine front lifting brackets.
    3. Remove the special tool.
      GJ0002383Courtesy of JAGUAR CARS, INC.
  4. Remove the front engine lifting brackets.
    GJ0002029Courtesy of JAGUAR CARS, INC.
  5. Remove the front engine lifting brackets.
    GJ0002380Courtesy of JAGUAR CARS, INC.
  6. Raise the vehicle.

    7. Left-hand drive vehicles 

  7. Attach the steering gear.
    • Remove the suitable tie straps supporting the steering gear.
    • Tighten to 45 Nm.
      GJ0002379Courtesy of JAGUAR CARS, INC.
  8. Attach the steering column shaft.
    GJ0002378Courtesy of JAGUAR CARS, INC.
  9. Install the steering column shaft retaining bolt.
    • Tighten to 25 Nm.
      GJ0002377Courtesy of JAGUAR CARS, INC.

    10. Vehicles with convertible top 

  10. Install the radiator splash shield. Refer to Front End Body Panels .
  11. Install the underbody front cross brace.
    GJ0002268Courtesy of JAGUAR CARS, INC.

    12. All vehicles 

  12. Install the engine mount retaining bolt.
    • Tighten to 30 (+/- 15%) Nm.
      GJ0002019Courtesy of JAGUAR CARS, INC.
  13. Lower the vehicle.
About FixVault