FixVault
Home › Jaguar › 2005 › XJ8 Base › Repair and Diagnosis › Transmission › Transmission Control Systems › External Controls › Removal & Installation › Selector Lever Cable & Bracket › Removal

Selector Lever Cable & Bracket: Removal

  1. Remove the FLOOR CONSOLE .
  2. Move the transmission selector lever to the "R" position.
  3. Detach the wiring harness bracket.
    1. Reposition the wiring harness.
    2. Detach the wiring harness bracket.

    See Figure.

  4. Detach the selector lever cable.
    • Loosen the selector lever cable retaining nuts.

    See Figure.

  5. Detach the selector lever cable. See Figure.
  6. Detach the selector lever cable.
    Fig 1: Detaching & Attaching Selector Lever Cable
    G00382724Courtesy of JAGUAR CARS, INC.
  7. Raise and support the vehicle.
  8. Detach the selector lever cable.
    Fig 2: Disconnecting Selector Lever Cable
    G00382671Courtesy of JAGUAR CARS, INC.
  9. Remove the selector lever cable.
    Fig 3: Removing & Installing Selector Lever Cable Retaining Bolts
    G00382672Courtesy of JAGUAR CARS, INC.
About FixVault