FixVault
Home › Jaguar › 2007 › XJ8 Base › Repair and Diagnosis › External Pages › Different car › Section 168 (MULTIFUNCTION Electronic Modules) › Multifunction Electronic Modules › Remote Keyless Entry (RKE) Module - Removal and Installation › Installation

Remote Keyless Entry (RKE) Module - Removal and Installation: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the keyless entry module.
    • Connect the electrical connectors.
    • Install the screws.
  2. Install the RH side footwell trim panel.
    • Carefully secure the clips.
  3. Connect the battery ground cable and install the cover. Refer to Specifications article.
  4. Connect WDS to the vehicle and configure a new module.
About FixVault