Speed Control Sensor Adjustment - General Procedures

Special Tools

Tool Illustration	Tool Name	Tool Number
Courtesy of JAGUAR CARS, INC.	Inclinometer	501-F007

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
1. Raise and support the vehicle.
2. Remove the front bumper cover. Refer to Front Bumper Cover .
CAUTION: Drive the vehicle on to a flat, level surface.
3. Position the vehicle on a smooth level surface and settle the suspension.

   Courtesy of JAGUAR CARS, INC.

4. Using the special tool, check the speed sensor is level, (+/- 0.5 degree).

   Courtesy of JAGUAR CARS, INC.

NOTE: The speed sensor has no mechanical horizontal adjustment.
NOTE: Do not release the lock nut.
5. Using the special tool, set the speed control sensor.
   • Rotate the vertical adjuster.
   • Adjust using an internal Torx Bit.
6. Install the front bumper cover. Refer to Front Bumper Cover .