Service Action: Engine Control Module Reprogramming (K006)

Publication date: 2010-03-15
Reference number: K006

SERVICE ACTION: ENGINE CONTROL MODULE REPROGRAMMING

TECHNICAL SERVICE BULLETIN

Reference Number(s): K006, Date of Issue: March 15, 2010

JAGUAR:	2007 XK (X150) 4.2L NA only
SECTION:	303
VIN:	B18932 - B19858
ISSUE:	2

SERVICE INFORMATION

SERVICE ACTION K006 is closed effective 29 June 2009.

The Repair Procedure outlined in this Technical Bulletin does remain valid for the repair of a vehicle exhibiting the concern as outlined.

NOTE: THIS SERVICE ACTION IS VALID UNTIL 29 JUNE 2009

AFFECTED VEHICLE RANGE

XK (X150) 4.2L NA only

VIN: B18932 - B19858

Model Year: 2007

CONDITION SUMMARY

INCORRECT SOFTWARE MAY RESULT IN MIL ILLUMINATION

Situation: The Engine Control Module (ECM) calibration for the HO2 sensor slow diagnostic on some 2007 model year XK vehicles has been set to an incorrect value. Jaguar is conducting a customer satisfaction program on these 2007 model year 4.2L Naturally Aspirated vehicles to update the ECM calibration files. Owners could experience illumination of the Malfunction Indicator Lamp (MIL) illuminating with Diagnostic Trouble Code (DTC) P0133 and P0153 stored. No other symptom or effect on drivability will be experienced.

Action: Affected vehicles should have the ECM re-configured with current 2007MY EMS calibration. Follow the Repair Procedure in this bulletin.

Unsold vehicles must be repaired prior to retail sale delivery.
Vehicles in the hands of customers should be repaired at the first available opportunity.

TOOLS

IDS with IDS-DVD107 or later and Patch File 6 or later

Jaguar-approved Midtronics Vehicle Power Supply

WARRANTY

NOTE: When confirming an appointment check DDW to ensure that all outstanding Service Campaigns are identified. Always ensure that the specific vehicle is affected by this Service Action prior to undertaking any rework action.

DDW will be updated to reflect only those vehicles affected.
Some vehicles have been reworked at the factory and at Ports of Entry. These vehicles are no longer affected by this Service Action and have been removed from DDW.

Warranty claims should be submitted quoting program code K006 , together with the relevant Option Code from the table; his will result in payment of the stated time. As Option Codes are used, there is no requirement for you to enter parts or labor. These are provided for information only.

WARRANTY INFORMATION

Program Code	Option	Description	SRO	Time	Part Number	Qty
K006	B	Reconfigure ECM	86.99.13	0.30	NA	NA
K006	C	Reconfigure ECM	86.99.13	0.30	NA	NA
K006	C	Drive in/drive out	10.10.10	0.10

Normal warranty policy and procedures apply.

REPAIR PROCEDURE

UPDATE ECM SOFTWARE

CAUTION: This procedure requires IDS with IDS-DVD107 or later and Patch File 6 or later

CAUTION: A Jaguar-approved Midtronics Vehicle Power Supply must be connected to the vehicle battery during diagnosis and software downloads.

Connect the Midtronics power supply to the vehicle battery.
Connect IDS to the vehicle and begin a new diagnostic session by entering the correct VIN for the current vehicle.
Follow the IDS prompts to read the vehicle configuration.
When prompted 'Do you wish to read diagnostic trouble codes?' select 'NO' and then press 'tick' to continue.
When the 'Content Model' is displayed, select 'Vehicle Configuration' tab.
Select from the menu 'Module Programming'.
Select 'Configure Existing Modules' from the drop down menu.
Select 'Engine Control Module' from the menu and then press 'tick' to continue.
Follow all on-screen instructions to complete this task.
When the task is completed, exit the current session.
Disconnect IDS and the battery power supply. CLOSED