FixVault
Home › Jaguar › 2007 › XK8 2D Convertible › Repair and Diagnosis › Quick Lookups › Technical Bulletins › Technical Service Bulletins › Engine Control Systems › Service Action: TCM Software Update (K005)

Service Action: TCM Software Update (K005)

Publication date: 2011-03-25
Reference number: K005

SERVICE ACTION: TCM SOFTWARE UPDATE

SERVICE ACTION: TCM SOFTWARE UPDATE

TECHNICAL SERVICE BULLETIN

Reference Number(s): K005, Date of Issue:  25 March 2011
JAGUAR: 2007 XK (X150)
SECTION: 303
VIN: B00125 - B03532
ISSUE: 3

SERVICE ACTION K005 IS CLOSED EFFECTIVE 31 DECEMBER 2009

The Repair Procedure does remain valid for vehicles exhibiting the symptom(s) described. All Warranty claims up to the date of expiration must be submitted for payment within 30 days of completion of repair.

AFFECTED VEHICLE RANGE

XK (X150) VIN: B00125 - B03532 

Model Year: 2007 

CONDITION SUMMARY

Situation:  A limited number of 2007 model year XK vehicles may have been manufactured away from process, and in some cases the Engine Control Module (ECM) is unable to report the freeze frame data on behalf of the Transmission Control Module (TCM). There is no effect on the customer as the vehicle remains fully operable.

Action: Unsold vehicles must be repaired prior to hand-over of the vehicle for retail sale.  For those vehicles in the hands of the customer, you are requested to repair the vehicle at the first available opportunity using IDS DVD107 patch file 6 or later. Follow the Repair Procedure in this Bulletin.

PARTS

No parts required 

TOOLS

Latest IDS DVD; software first available on IDS DVD107 Patch File 6 

Midtronics PSC-550 Vehicle Power Supply 

WARRANTY

NOTE: When confirming an appointment check DDW to ensure that all outstanding Service Campaigns are identified. Always ensure that the specific vehicle is affected by this Service Action prior to undertaking any rework action and determine if any other Service Campaigns may be outstanding on the vehicle.

Warranty claims should be submitted quoting Program Code K005  , together with the relevant Option Code from the table. This will result in payment of the stated time. As Option Codes are used, there is no requirement for you to enter parts or labor; these are provided for information only.

This Service Action is valid for a limited time only. Repairs must be complete and warranty claims accepted for payment prior to the 31 December 2009  expiration date.

WARRANTY INFORMATION

Program Code Option Code Description SRO Time (hours) Part Number Qty
K005  B  Reconfigure ECM 86.99.13 0.30 NA NA
K005  C  Reconfigure ECM
Drive in/drive out		 86.99.13
10.10.10		 0.30
0.10		 NA NA

Normal Warranty policies and procedures apply 

REPAIR PROCEDURE

UPDATE ECM SOFTWARE 

CAUTION: A Midtronics PSC-550 Vehicle Power Supply must be connected to the vehicle battery during diagnosis and software downloads.
  1. Connect the Midtronics PSC-550 power supply to the vehicle battery.
    CAUTION: This procedure requires IDS DVD107 patch file 6 or later
  2. Connect IDS to the vehicle and begin a new diagnostic session by entering the correct VIN for the current vehicle.
  3. Follow the IDS prompts to read the vehicle configuration.
  4. When prompted 'Do you wish to read diagnostic trouble codes?' select 'NO' and then press 'tick' to continue.
  5. When the 'Content Model' is displayed, select 'Vehicle Configuration' tab.
  6. Select from the menu 'Module Programming'.
  7. Select 'Configure Existing Modules' from the drop down menu.
  8. Select 'Engine Control Module' from the menu and then press 'tick' to continue.
  9. Follow all on-screen instructions to complete this task.
  10. When the task is completed, exit the current session.
  11. Disconnect IDS and the battery power supply.
About FixVault