FixVault
Home › Jaguar › 2007 › XKR 2D Convertible › Repair and Diagnosis (Single Page) › Accessories & Equipment › Infotainment › Navigation System › Navigation System › Navigation System Display Module - Removal and Installation › Removal

Navigation System Display Module - Removal and Installation: Removal

  1. Disconnect the battery ground cable. Refer to Specifications article.
    GJ0009187Courtesy of JAGUAR CARS, INC.
  2. Remove the instrument panel center reinforcement trim panel.
    • Release from the 5 clips.
    GJ0009188Courtesy of JAGUAR CARS, INC.
    3. CAUTION: Protect the surrounding trim from damage when changing the component.
  3. Release the navigation system module bracket.
    • Remove the 4 Torx screws.
    • Disconnect the 10 electrical connectors.
    • Release the assembly.
    GJ0009189Courtesy of JAGUAR CARS, INC.
    4. NOTE: Do not disassemble further if the component is removed for access only.
  4. Remove the navigation screen module.
    • Remove the trim panel veneer upper retaining clip.
    • Remove the 2 Torx screws.
    • Remove the 4 Torx bolts.
About FixVault