Restraints Control Module (RCM) - Removal and Installation: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Jaguar XKR, 2009 Jaguar XK8, 2008 Jaguar XKR, 2008 Jaguar XK8, and 2007 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the RCM.
- Tighten the bolts to 10 Nm (7 lb.ft).
- Connect the electrical connectors.
- Install the keyless vehicle antenna. Refer to Keyless Vehicle Antenna article.
- Connect the battery ground cable and install the cover. Refer to Specifications article.
- Using WDS, configure a new module.