FixVault
Home › Jaguar › 2010 › XK 2D Convertible › Repair and Diagnosis (Single Page) › Heating, Ventilation & A/C (HVAC) › General Servicing › Control Components › Control Components › Removal And Installation › Climate Control Module › Installation

Climate Control Module: Installation

  1. Install the A/C control module.
    • Install the Torx screws.
    • Connect the electrical connector.
  2. Install the instrument panel. Refer to Instrument Panel information.
  3. Connect the battery ground cable and install the cover. Refer to Specifications information.
  4. Connect WDS to the vehicle and configure a new module.
About FixVault